After verifying that prerequisites are met, you can change passwords and configure Edge Gateway from within the truePass Admin Console.
To configure Edge Gateway:
1. Open the truePass Admin Console from your home screen.
The truePass Admin window appears.
2. Enter the following information and click OK:
- User name: admin
- Password: 1234
The truePass Admin Management Dashboard appears.
3. Click System Configuration on the navigation pane on the left side of the console.
The System Configuration window appears.
4. Enter the password of your choice and click Save.
Your password has been changed.
| Note: While this step is optional, it is highly recommended to change your password immediately upon accessing the Dashboard. |
5. Click Service Configuration on the navigation pane on the left side of the console.
The Service Configuration page appears.
6. Click Edge Gateway Configuration.
The Edge Gateway Configuration – Service Configuration window appears.
6. Under URL, change the domain name to the URL address of your choice.
| Important: A wild card certificate must be used to secure the domain. |
7. Click Deploy and then Yes.
The Network policies and configuration deployments window appears.
8. Click Yes, OK, and Close.
The deployment is completed. Ensure that the URL in the Description column is correct.
| Important: At this point it is necessary to edit your local host file with the local network IP that you provided to the machine in step 1. Editing the host file requires Admin privileges. |
See this example with a path to the host file and where to change the local network IP:
Host file path: Local Disk (C) > Windows > System32 > drivers >etc
IP Before:
IP After:
